Product Catalog

Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 24" base cabinet. ***Note: We have done the measuring for you... This set measures 18 3/4"" long to accommodate for the toe kick inset.*** Only available in silver as of 2011.

Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 21" base cabinet. ***Note: We have done the measuring for you... This set measures 15 3/4" long to accommodate for the toe kick inset.*** Only available in silver as of 2011.

Includes: (2) EZ-Levels, (1) extension rod, & all hardware necessary for either the "right or left" side of any 18" base cabinet. ***Note: We have done the measuring for you... This set measures 12 3/4" long to accommodate for the toe kick inset.*** Only available in silver as of 2011.

Includes: (1) EZ-Level & all hardware necessary for either the "right or left" side of any cabinet that measures 15" (or less) in depth. ***Note: We have done the measuring for you... This is a single leveling unit sufficient for any cabinet 15" or less in depth*** Only available in silver as of 2011.

***We include (1) for every EZ-Level order.*** Order this ONLY if you need an additional bit for backup or for crew members etc.

This drill bit is 6X's Faster than other bits! We have them made especially for the EZ-Level system. Paddle bits are very slow... They tend to beat up your cabinets... and there messy! These bits will bore through your toe-kicks like butter!!! ***THIS IS A MUST HAVE... if EASY... CLEAN cuts are important!****

This is simply the BEST stud finder we have ever used! It ALWAYS works! It NEVER finds bogus locations like the others! ("other" stud finders... tend to find plumbing pipes... wires... etc) Not cool! This... is the best!

"""Crown can be difficult. Worse... One wrong cut can cost you big time! This is the easiest system I know of. It's quick, easy and inexpensive! (My kind of tool)!"""

There are dozens cheaper clamps available at the big box stores. These clamps simply make your installation a lot easier. They are not necessary... but they are better and faster than the others. Each order comes with (2) clamps.

FINALLY! I have searched for over a year trying to find a vendor that carried the #10 bit individually! I've used every countersink bit available... but this bit is the best! It doesn't slip (like most do)... and the tapered design works wonders! (This is the bit you will need to screw your cabinet styles together. It works perfectly with the Decking screws)

We have been using these screws for years now. I wouldn't even consider using anything else. 1). They're a nice natural maple wood color 2). The bit doesn't slip 3). The tapered heads tuck in nicely and look sharp. 3). The coating causes them to glide in easily and since they are made for decking... you can beet they are VERY STRONG. Use these to screw styles together (framed cabinet only) and to mount cabinets to the wall.

Every kitchen will require the use of shims: Behind the cabinets... In-between cabinets... etc. I like these shims because they tend to break much more evenly than the traditional wooden shims. Composite Shims are difficult to find... so we've included them here for you. (1) Pack should be plenty for the typical kitchen.

A MUST HAVE!! The Stanley Fat Max 77-153 has been bought out by another company and aside from the red color... it's the same laser! FINALLY... AN AFFORDABLE LASER! In my opinion the laser is one of the most important tools for installing kitchens. TRIPOD INCLUDED!!! (however it's a tad too short for wall cabinets) so you'll want to set the tripod onto something for a little extra height. (one of the boxes that your cabients came in always works)